| |
Custom
Designs |
| |
Separator installations vary greatly
with each location. Highland custom fabricates
oil/water separators to satisfy your specific
needs. The following information illustrates
some of the influent and effluent/product handling
options available. |
| |
|
| |
Series
G
Series G Oil/Water Separators feature an integral
sand interceptor compartment to permit sand
and gravel to settle out before the wastewater
enters the oil/water separator. |
| |
|
| |
|
| |
Series
H
Series H Oil/Water Separators feature an integral
product sump for storing separated oil. A special
product weir permits the removal of only the
skimmed oil by pump-out. The effluent is discharged
by either pump or gravity flow. |
| |
|
| |
|
| |
Series
I
Series I Oil/Water Separators feature an integral
product reservoir for receiving skimmed oil.
The oil is removed by pump or gravity through
a side port to a remote oil storage tank. The
effluent is discharged by either pump or gravity
flow. |
| |
|
| |
|
| |
Series
J
Series J Oil/Water Separators feature an integral
effluent pump-out chamber with level controls
to operate a pump at prescribed levels. The
pump effluent can then be rerouted through Highland's
Activated Clay/Carbon Filtration unit.
|
| |
|
